How to fix wet cell phones.

Question :How to fix wet cell phones ?

Answer : Immediately remove the phone from the water surface.if the water is salty ,rinse it again in fresh water (as salt tends to get crystallized inside
Then remove the battery at once and as it save the power circuits if they are not attached to the pwoer source when it is wet.
Remove your sim card along with the battery too.
Then quickly shake the phone so that water drops are removed and wipe it clean both inside and outside with a tissue ,you need to be sure whether you have covered all the areas where the water is present.Use a vaccum hose from a distance ,it will draw out any moisture from areas you cant reach.DO not use a dryer or use the vaccum hose close to the mobile as it might damage the phone
Then remove the phone and let it sit on a paper tissue.
No moisture should appear on the towel after 4-6 hours. If it does, you need to repeat the same process .After 24 hrs test it with the battery, If that doesn't work, try it with the charger. If it works with a charger, you just need a new battery.
If all else fails, take the phone to the manufacturer and tell them what happened. They will know anyways because there are indicators inside the cell phone that tell when the phone has been wet. The manufacturer should be able to fix the phone for a fee. 0 comments

Sharing is caring. Share this article now!

0 comments:

Post a Comment